Replacement Plates for Forklifts, Skid Steers and Scissor Lifts

Short answer: Browels makes replacement data plates for forklifts, skid steers and scissor lifts in stainless steel or anodized aluminum. Each plate is cut to size with rounded corners and punched holes, and there is no minimum order. Send a photo of your old plate to get a quote.

A missing or unreadable data plate causes real problems. Operators need the capacity, model and serial number on the machine. Inspectors, insurers and buyers expect to see them. Dealers need them for parts and warranty.

Browels, a Canadian manufacturer in Esterhazy, Saskatchewan, makes replacement data plates for forklifts, skid steers and scissor lifts, and we sell the material blanks and profiles if you prefer to mark your own.

Choose your material

• Stainless steel for outdoor service, washdown and rough duty.
• Anodized aluminum, .040 in (1.0 mm) or .032 in (0.8 mm) thick, for a clean laser marked plate.

Cut to size and ready to mount

Every plate and blank is cut to size, corners rounded and holes punched. There is nothing to trim and nothing to drill. Fasten it to the machine and you are done.

No minimum order

One plate for one machine is a normal order. Rental fleets can replace plates across the yard. Dealers, rebuilders and repair shops can order blanks and profiles to mark in house.

What to send us

Send a photo of the old plate, or the size you need and the information that has to appear on it: model, serial number, capacity and any ratings or warnings. We match the layout to your machine.

Frequently asked questions

Can I buy a replacement data plate for my forklift, skid steer or scissor lift?

Yes. Browels makes replacement plates for all three. Send a photo of your old plate, or the details that must appear on it, and we will quote the job.

What is an SN plate?

An SN plate, also called a serial number plate or data plate, identifies a machine by its model and serial number. It is usually riveted or screwed to the frame.

What materials are available?

Stainless steel or anodized aluminum. Anodized aluminum comes in .040 in (1.0 mm) and .032 in (0.8 mm) thickness.

Is there a minimum order?

No. One plate is a normal order.

Are the plates ready to install?

Yes. Each plate is cut to size with corners rounded and holes punched.

What information goes on a replacement plate?

Usually the model, serial number, capacity and any ratings or warnings. Send the original plate or a photo and we match it.

Order a replacement plate

Need a plate for a forklift, skid steer or scissor lift? Contact Browels with your details and we will quote it. Looking for blanks only? See our material blanks and profiles.